Metrology
Metrology
Millimar P2004 B Inductive Probe
EN
Product features
  • Models with or without a compressed air (pneumatic) lifter or with vacuum retraction
  • Measuring pin mounted in ball-bearing guide
  • High linearity over the entire measuring range
  • Excellent electromagnetic shielding (EMC)
  • All probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply
  • Technical data

Order no.Measuring range fromMeasuring range up toDistance of lower stop MINDistance of lower stop MAXDistance of upper stop MINDistance of upper stop MAXLifter / retractionMeasuring force (N)Sensitivity deviationRepeatability fw (µm)Hysteresis fu (µm)Linearity deviation within +/- 0,5 mmLinearity deviation within +/- 1,0 mmLinearity deviation within +/- 2,0 mmIP protection categoryCable lengthWorking temperatureWorking temperature MINWorking temperature MAXOperating temperature MinOperating temperature MaxTemperature coefficientCompatibility
5323030
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Mahr-VLDT
5323031
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Tesa
5323033
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Marposs
5323034
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Federal