MarSurf LD 130 Combined contour and surface measuring station
Product features
MarSurf LD 130 / LD 260. A step into a new dimension
Combined contour and roughness measurements in just one step come courtesy of proven cutting-edge technology from Mahr metrology. The MarSurf LD 130 and MarSurf LD 260 measuring stations have been systematically developed to draw on the experience from the first generation of equipment.
  • Roughness and contour in just one step
  • High measuring and positioning speed cuts measuring times dramatically
  • Innovative probe system removal
  • Quick and reliable probe arm exchange with simultaneous probe arm detection by magnetic bracket
  • Long measuring length up to 260 mm (MarSurf LD 260) with a measuring stroke of 13 mm (100 mm probe arm length) or 26 mm (200 mm probe arm length)
  • Modular construction for ease of maintenance
  • No need to fully dismantle the measuring stand for maintenance
  • Technical data
  • Applications
  • Shipment

0.8 nm
Start of traversing length (in X)
0.1 mm
End of traversing length (in X)
130 mm
Positioning speed
0.02 mm/s to 200 mm/s
Measuring speed
0.02 mm/s to 10 mm/s;
for roughness measurements
0.1 mm/s to 0.5 mm/s is recommended
Measuring range mm

13 mm (100mm Tastarm)
26 mm (200mm Tastarm)

Traversing lengths
0.1 mm - 130 mm or 260 mm
Measuring force (N)
0.5 mN to 30 mN, software-adjustable

Machine building
Roller bearings, threads, threaded rods, ball screws, shafts, racks, ball heads, valves

Measurement close to the production area
Contour and surface roughness measurement in partially to fully automatic process

Automotive industry
Engine parts including cylinder block, cylinder head, crankshaft, camshaft, valves, steering, gearbox, injection systems, turbocharger

Contour and surface roughness measurement for hip or knee endoprostheses, contour measurement for medical screws, contour and surface roughness measurement for dental implants

Contour and surface roughness measurement of aspherical lenses

  • MarSurf XCR 20 including MidRange LD, MarSurf XCR 20 software, Mahr license key
  • TFT monitor
  • MCP 21 manual control panel
  • MarSurf LD 130 or LD 260 drive unit including LP D 14-10-2/60 LP D 14-10-500 probe system and probe arms
  • Calibration standard for contour 1, accuracy class 1
  • MarSurf ST 500 CNC measuring stand with 700 mm x 550 mm HG granite plate, including control module
  • Damping element set
  • CT 300 XY table