Metrology
Metrology
Millimar P2010 B Inductive Probe
EN
  • Models with or  without compressed air (pneumatic) lifter or vacuum retraction
  • Measuring pin mounted in ball-bearing guide
  • High linearity over the entire measuring range
  • Excellent electromagnetic shielding (EMC)
  • All probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply
  • Chemical resistance data: resistant to oil, gasoline, water and aliphatics. Moderately resistant to acids, bases, solvents and ozone
  • Technical data

Order no.Measuring range fromMeasuring range up toDistance of lower stop MAXDistance of upper stop MAXLifter / retractionMeasuring force (N)Sensitivity deviationRepeatability fw (µm)Hysteresis fu (µm)Linearity deviation within +/- 2,0 mmLinearity deviation within +/- 5,0 mmIP protection categoryCable lengthWorking temperatureWorking temperature MINWorking temperature MAXOperating temperature MinOperating temperature MaxTemperature coefficientCompatibility
5324030
-5 mm
5 mm
-5.3 mm
5.3 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Mahr-VLDT
5324031
-5 mm
5 mm
-5.3 mm
5.3 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Tesa
5324033
-5 mm
5 mm
-5.3 mm
5.3 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Marposs
5324034
-5 mm
5 mm
-5.3 mm
5.3 mm
Compressed Air Retraction (max. 1 bar)
depending upon air pressure
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Federal