Metrology
Metrology
Millimar P2010 A Inductive Probe
EN
Product features
  • Wide product spectrum; models with or without a compressed air (pneumatic) lifter or with vacuum retraction
  • With rotary stroke bearings
  • High linearity over the total measuring range
  • Excellent electromagnetic shielding (EMC)
  • All probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply
  • Technical data

Order no.Measuring range fromMeasuring range up toDistance of lower stop MAXDistance of upper stop MAXLifter / retractionMeasuring force (N)Increase in measuring forceSensitivity deviationRepeatability fw (µm)Hysteresis fu (µm)Linearity deviation within +/- 2,0 mmLinearity deviation within +/- 5,0 mmIP protection categoryCable lengthWorking temperatureWorking temperature MINWorking temperature MAXOperating temperature MinOperating temperature MaxTemperature coefficientCompatibility
5324020
-5 mm
5 mm
-5.3 mm
5.3 mm
Vacuum Lifter
0,75 N +/- 0,15 N
0,1 N/mm
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Mahr-VLDT
5324021
-5 mm
5 mm
-5.3 mm
5.3 mm
Vacuum Lifter
0,75 N +/- 0,15 N
0,1 N/mm
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Tesa
5324023
-5 mm
5 mm
-5.3 mm
5.3 mm
Vacuum Lifter
0,75 N +/- 0,15 N
0,1 N/mm
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Marposs
5324024
-5 mm
5 mm
-5.3 mm
5.3 mm
Vacuum Lifter
0,75 N +/- 0,15 N
0,1 N/mm
0.3 %
0.2 µm
1 µm
4 µm
20
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Federal