Metrology
Metrology
MarGage 409 C Rectangular Gage Bolck Set made of Ceramic
EN
Advantages of ceramic:
  • Resistant to impact and breakage. Damage to measuring surfaces from scratches or to edges from impact causes minimal burring. Sliding ability is retained for longer
  • Extremely wear-resistant. The longest life and highest stability of any material currently used in measuring technology. Allows for significantly longer gage monitoring intervals
  • Corrosion-resistant. Circonimar is highly resistant to lyes, acids, oil, grinding water and other aggressive media, even without protective measures
  • Coefficient of expansion similar to that of steel. Therefore there are no usage restrictions, even in extreme temperature conditions
  • Non-magnetizable. Circonimar is antistatic, anti-magnetic and non-conductive. It does not attract dirt or dust and is suitable for use in the vicinity of magnetic fields

  • Technical data

Order no.Quantity per setStandardTolerance classTable nominal values gage blocks
4800036
121 pc(s).
DIN EN ISO 3650
K
Nennmaße Stufung Stückzahl
mm mm
0,5 - 1
1,001...1,009 0,001 9
1,01...1,49 0,01 49
1,6...1,9 0,1 4
1...24,5 0,5 48
25..30..40..50..60..70 75..80..90..100 - 10
4800037
121 pc(s).
DIN EN ISO 3650
2
Nennmaße Stufung Stückzahl
mm mm
0,5 - 1
1,001...1,009 0,001 9
1,01...1,49 0,01 49
1,6...1,9 0,1 4
1...24,5 0,5 48
25..30..40..50..60..70 75..80..90..100 - 10
4800038
121 pc(s).
DIN EN ISO 3650
0
Nennmaße Stufung Stückzahl
mm mm
0,5 - 1
1,001...1,009 0,001 9
1,01...1,49 0,01 49
1,6...1,9 0,1 4
1...24,5 0,5 48
25..30..40..50..60..70 75..80..90..100 - 10
4800039
121 pc(s).
DIN EN ISO 3650
1
Nennmaße Stufung Stückzahl
mm mm
0,5 - 1
1,001...1,009 0,001 9
1,01...1,49 0,01 49
1,6...1,9 0,1 4
1...24,5 0,5 48
25..30..40..50..60..70 75..80..90..100 - 10