Metrology
Metrology
MarCator 1087 R Digital Indicator
EN
Product features
  • High contrast LCD
  • Operating and display unit (bezel) can be rotated through 280°
  • Immediate measurements due to the Reference system
  • Lifter protection cap on the measuring spindle
  • Mounting shank and measuring spindle are both made of hardened stainless steel
  • Technical data
  • Functions

Order no.Product typeMeasuring span in mmMeasuring span (inches)ResolutionResolution inchesGraduation value mmGraduation value inchRange of analog display mmRange of analog display inchesError limit (mm)Repeatability mmStandardMeasuring force (N)IP protection categoryHeight of digits
4337660
1087 R
12.5 mm
.5"
0.0005 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002" / .00005" / .0001" / .0002" / .0005"
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005" / .0001'' / .0002'' / .0005" / .001" / .002"
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004" / ± .001'' / ± .002" / ± .004" / ± .01''
0.004 mm
0.001 mm
Factory standard
0.65 - 0.9
IP 42
8.5 mm
4337661
1087 R
25 mm
1"
0.0005 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002" / .00005" / .0001" / .0002" / .0005"
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005" / .0001'' / .0002'' / .0005" / .001" / .002"
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004" / ± .001'' / ± .002" / ± .004" / ± .01''
0.004 mm
0.001 mm
Factory standard
0.65 - 1.15
IP 42
8.5 mm
4337670
1087 R
12.5 mm
.5"
0.0005 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002" / .00005" / .0001" / .0002" / .0005"
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005" / .0001'' / .0002'' / .0005" / .001" / .002"
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004" / ± .001'' / ± .002" / ± .004" / ± .01''
0.004 mm
0.001 mm
Factory standard
0.65 - 0.9
IP 42
8.5 mm
4337671
1087 R
25 mm
1"
0.0005 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002" / .00005" / .0001" / .0002" / .0005"
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005" / .0001'' / .0002'' / .0005" / .001" / .002"
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004" / ± .001'' / ± .002" / ± .004" / ± .01''
0.004 mm
0.001 mm
Factory standard
0.65 - 1.15
IP 42
8.5 mm

  • ON/OFF
  • RESET (set display to zero)
  • mm/inch
  • Reversal of counting direction
  • PRESET (for entering a numerical value)
  • TOL (enter tolerance limit values)
  • MAX/MIN memory for searching the reversal point
  • TIR (MAX-MIN) for testing flatness and concentricity
  • ABS (display can be set to zero, without losing the reference to the Preset value)
  • DATA (Data transmission via connection cable)
  • Factor (adjustable)
  • LOCK (individual button lock)